| Product information | Details |
|---|---|
| Manufacturer | WAGO GmbH & Co. KG |
| Model | PFC200, Part No. 750-8212 |
| Product type | Programmable logic controller |
| Generation | Second generation |
| Installation | 35 mm DIN rail |
| Product status | Active/current product |
| Duplicate check | No previous PFC200 listing identified |
Product overview
The WAGO PFC200 750-8212 is a compact, Linux-based industrial PLC for machinery, process automation, building systems and remote data acquisition. It combines PLC control, networking, web visualisation and secure data communication in one controller.
It connects directly to digital, analogue and special-function modules from the modular WAGO-I/O-SYSTEM 750/753.
Main features
- 1 GHz ARM Cortex-A8 processor
- 512 MB RAM
- 4 GB internal eMMC memory
- Two 10/100 Mbps Ethernet ports with integrated switch
- RS-232/RS-485 serial interface
- SD/SDHC memory-card slot
- Linux-based operating system
- CODESYS V3-based WAGO e!RUNTIME
- Integrated web server and web visualisation
- Local RUN/STOP/RESET control
- Expandable with WAGO 750/753 I/O modules
- Secure remote communication and data logging
- Standard, extended-temperature, telecontrol and XTR versions available
Technical specifications
| Parameter | Specification |
|---|---|
| Supply voltage | 24 V DC |
| Processor | ARM Cortex-A8, 1 GHz |
| RAM | 512 MB |
| Internal memory | 4 GB eMMC |
| Ethernet | 2 × RJ45, 10/100 Mbps |
| Serial communication | RS-232/RS-485 via D-sub connector |
| Programming | CODESYS V3 / WAGO e!COCKPIT ecosystem |
| Protocol support | Modbus TCP/RTU, EtherNet/IP, EtherCAT, MQTT, OPC UA and BACnet, depending on firmware/configuration |
| Memory expansion | SD/SDHC card |
| Mounting | DIN 35 rail |
| Protection rating | IP20 |
| Standard operating temperature | Approximately 0°C to +55°C |
| XTR versions | Available for extended environmental conditions |
Marine and offshore applications
- Ballast and heeling-control systems
- Pump and valve automation
- Alarm and machinery-monitoring panels
- Cargo and tank-management systems
- HVAC and refrigeration controls
- Generator and power-management interfaces
- Offshore skids and remote terminal units
- Data logging and ship-to-shore communication
- Retrofit replacement of ageing PLC systems
For harsh marine and offshore locations, the appropriate PFC200 XTR configuration should be selected. WAGO specifically identifies its 750 XTR range for shipbuilding and offshore applications.
